Gmini i2c support

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5655 a1c6a512-1295-4272-9138-f99709370657

firmware/drivers/i2c.c

@@ -17,13 +17,34 @@
  *
  ****************************************************************************/
 #include "lcd.h"
-#include "sh7034.h"
+#include "cpu.h"
 #include "kernel.h"
 #include "thread.h"
 #include "debug.h"
 #include "system.h"
 
 /* cute little functions, atomic read-modify-write */
+#ifdef HAVE_GMINI_I2C
+
+/* This is done like this in the Archos' firmware.
+ * However, the TCC370 has an integrated I2C
+ * controller (bound to the same lines). It should be
+ * possible to use it and thus save some space in flash.
+ */
+#define SDA_LO     (P3 &= ~0x20)
+#define SDA_HI     (P3 |= 0x20)
+#define SDA_INPUT  (P3CONH &= ~0x0C)
+#define SDA_OUTPUT (P3CONH |= 0x04)
+#define SDA        (P3 & 0x20)
+
+#define SCL_LO     (P3 &= ~0x10)
+#define SCL_HI     (P3 |= 0x10)
+#define SCL_INPUT  (P3CONH &= ~0x03)
+#define SCL_OUTPUT (P3CONH |= 0x01)
+#define SCL        (P3 & 0x10)
+
+#else
+
 /* SDA is PB7 */
 #define SDA_LO     and_b(~0x80, &PBDRL)
 #define SDA_HI     or_b(0x80, &PBDRL)
@@ -46,6 +67,7 @@
 #define SCL_HI     or_b(0x20, &PBDRH)
 #define SCL     (PBDR & 0x2000)
 #endif
+#endif
 
 /* arbitrary delay loop */
 #define DELAY   do { int _x; for(_x=0;_x<20;_x++);} while (0)
@@ -84,6 +106,10 @@ void i2c_init(void)
 {
    int i;
 
+#ifdef HAVE_GMINI_I2C
+   SCL_INPUT;
+   SDA_INPUT;   
+#else
 #ifdef HAVE_ONDIO_I2C
    /* make PB5, PB6 & PB7 general I/O */
    PBCR2 &= ~0xfc00; /* includes PB5, see FIXME below */
@@ -98,6 +124,7 @@ void i2c_init(void)
    /* for Recorders, it shuts off the charger, for FM/V2 it holds power */
    or_b(0x20, &PBIORL);
    or_b(0x20, &PBDRL);
+#endif
 
    SCL_OUTPUT;
    SDA_OUTPUT;

firmware/export/tcc730.h

@@ -55,6 +55,8 @@
 #define P2CONH MMIO(unsigned char,0x42)
 #define P2CONL MMIO(unsigned char,0x43)
 #define P3CON  MMIO(unsigned int,0x44)
+#define P3CONH MMIO(unsigned char,0x44)
+#define P3CONL MMIO(unsigned char,0x45)
 #define P3PUR  MMIO(unsigned char,0x46)
 #define P5CON              MMIO(unsigned char,0x48)
 #define P5PUR              MMIO(unsigned char,0x49)