From 2f16d4f1b3e52f0a268fa9679a72694f5a89dedf Mon Sep 17 00:00:00 2001 From: Barry Wardell Date: Tue, 19 Dec 2006 11:33:53 +0000 Subject: [PATCH] Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works. Changes made: Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader. Define MODEL_NAME string in config-*.h for use in bootloader. Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S. Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe): * Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100). * Remove unused DEBUG and STUB code from crt0-pp.S. * Make CPU wait for COP to be sleeping when we put the COP to sleep. * Invalidate COP cache when COP wakes * Flush CPU cache before waking COP * Make sure only the CPU clears the BSS (not the COP) * Make sure only the CPU sets up its own stack (not the COP) Rolo works on H10, so enable it. Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657 --- bootloader/SOURCES | 6 +- bootloader/e200.c | 190 ------------------------------- bootloader/{h10.c => main-pp.c} | 26 +++-- firmware/SOURCES | 6 +- firmware/boot.lds | 2 +- firmware/export/config-e200.h | 1 + firmware/export/config-h10.h | 1 + firmware/export/config-h10_5gb.h | 1 + firmware/rolo.c | 5 +- firmware/target/arm/crt0-pp-bl.S | 179 +++++++++++++++++++++++++++++ firmware/target/arm/crt0-pp.S | 135 +++++----------------- tools/configure | 4 +- tools/scramble.c | 4 +- 13 files changed, 239 insertions(+), 321 deletions(-) delete mode 100644 bootloader/e200.c rename bootloader/{h10.c => main-pp.c} (88%) create mode 100644 firmware/target/arm/crt0-pp-bl.S diff --git a/bootloader/SOURCES b/bootloader/SOURCES index 94f5a60e6b..b86365b429 100644 --- a/bootloader/SOURCES +++ b/bootloader/SOURCES @@ -2,10 +2,8 @@ ipod.c #elif defined(GIGABEAT_F) gigabeat.c -#elif defined(SANSA_E200) -e200.c -#elif defined(IRIVER_H10) || defined(IRIVER_H10_5GB) -h10.c +#elif defined(IRIVER_H10) || defined(IRIVER_H10_5GB) || defined(SANSA_E200) +main-pp.c #elif defined(ELIO_TPJ1022) tpj1022.c #else diff --git a/bootloader/e200.c b/bootloader/e200.c deleted file mode 100644 index 27b1118a1c..0000000000 --- a/bootloader/e200.c +++ /dev/null @@ -1,190 +0,0 @@ -/*************************************************************************** - * __________ __ ___. - * Open \______ \ ____ ____ | | _\_ |__ _______ ___ - * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / - * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < - * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ - * \/ \/ \/ \/ \/ - * $Id$ - * - * Copyright (C) 2006 Daniel Stenberg - * - * All files in this archive are subject to the GNU General Public License. - * See the file COPYING in the source tree root for full license agreement. - * - * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY - * KIND, either express or implied. - * - ****************************************************************************/ -#include "config.h" - -#include -#include -#include -#include "cpu.h" -#include "system.h" -#include "lcd.h" -#include "kernel.h" -#include "thread.h" -#include "ata.h" -#include "fat.h" -#include "disk.h" -#include "font.h" -#include "adc.h" -#include "backlight.h" -#include "panic.h" -#include "power.h" -#include "file.h" - -static inline void blink(void) -{ - volatile unsigned int* ptr; - int i; - ptr = (volatile unsigned int*)0x70000020; - - *ptr &= ~(1 << 13); - for(i = 0; i < 0xfffff; i++) - { - } - *ptr |= (1 << 13); - for(i = 0; i < 0xfffff; i++) - { - } -} - -static inline void slow_blink(void) -{ - volatile unsigned int* ptr; - int i; - ptr = (volatile unsigned int*)0x70000020; - - *ptr &= ~(1 << 13); - for(i = 0; i < (0xfffff); i++) - { - } - for(i = 0; i < (0xfffff); i++) - { - } - for(i = 0; i < (0xfffff); i++) - { - } - - *ptr |= (1 << 13); - for(i = 0; i < (0xfffff); i++) - { - } - for(i = 0; i < (0xfffff); i++) - { - } - for(i = 0; i < (0xfffff); i++) - { - } -} - -static inline unsigned long get_pc(void) -{ - unsigned long pc; - asm volatile ( - "mov %0, pc\n" - : "=r"(pc) - ); - return pc; -} - -/* These functions are present in the firmware library, but we reimplement - them here because the originals do a lot more than we want */ - -void reset_poweroff_timer(void) -{ -} - -int dbg_ports(void) -{ - unsigned int gpio_a, gpio_b, gpio_c, gpio_d; - unsigned int gpio_e, gpio_f, gpio_g, gpio_h; - unsigned int gpio_i, gpio_j, gpio_k, gpio_l; - - char buf[128]; - int line; - - lcd_setmargins(0, 0); - lcd_clear_display(); - lcd_setfont(FONT_SYSFIXED); - - while(1) - { - gpio_a = GPIOA_INPUT_VAL; - gpio_b = GPIOB_INPUT_VAL; - gpio_c = GPIOC_INPUT_VAL; - - gpio_g = GPIOG_INPUT_VAL; - gpio_h = GPIOH_INPUT_VAL; - gpio_i = GPIOI_INPUT_VAL; - - line = 0; - snprintf(buf, sizeof(buf), "GPIO_A: %02x GPIO_G: %02x", gpio_a, gpio_g); - lcd_puts(0, line++, buf); - snprintf(buf, sizeof(buf), "GPIO_B: %02x GPIO_H: %02x", gpio_b, gpio_h); - lcd_puts(0, line++, buf); - snprintf(buf, sizeof(buf), "GPIO_C: %02x GPIO_I: %02x", gpio_c, gpio_i); - lcd_puts(0, line++, buf); - line++; - - gpio_d = GPIOD_INPUT_VAL; - gpio_e = GPIOE_INPUT_VAL; - gpio_f = GPIOF_INPUT_VAL; - - gpio_j = GPIOJ_INPUT_VAL; - gpio_k = GPIOK_INPUT_VAL; - gpio_l = GPIOL_INPUT_VAL; - - snprintf(buf, sizeof(buf), "GPIO_D: %02x GPIO_J: %02x", gpio_d, gpio_j); - lcd_puts(0, line++, buf); - snprintf(buf, sizeof(buf), "GPIO_E: %02x GPIO_K: %02x", gpio_e, gpio_k); - lcd_puts(0, line++, buf); - snprintf(buf, sizeof(buf), "GPIO_F: %02x GPIO_L: %02x", gpio_f, gpio_l); - lcd_puts(0, line++, buf); - line++; - snprintf(buf, sizeof(buf), "ADC_1: %02x", adc_read(ADC_0)); - lcd_puts(0, line++, buf); - snprintf(buf, sizeof(buf), "ADC_2: %02x", adc_read(ADC_1)); - lcd_puts(0, line++, buf); - snprintf(buf, sizeof(buf), "ADC_3: %02x", adc_read(ADC_2)); - lcd_puts(0, line++, buf); - snprintf(buf, sizeof(buf), "ADC_4: %02x", adc_read(ADC_3)); - lcd_puts(0, line++, buf); - lcd_update(); - } - return 0; -} - -void mpeg_stop(void) -{ -} - -void usb_acknowledge(void) -{ -} - -void usb_wait_for_disconnect(void) -{ -} - -void sys_poweroff(void) -{ -} - -void system_reboot(void) -{ - -} - -void main(void) -{ - kernel_init(); - adc_init(); - lcd_init_device(); - - dbg_ports(); -} - diff --git a/bootloader/h10.c b/bootloader/main-pp.c similarity index 88% rename from bootloader/h10.c rename to bootloader/main-pp.c index 0cfd64a96e..a533cc7044 100644 --- a/bootloader/h10.c +++ b/bootloader/main-pp.c @@ -40,8 +40,8 @@ #include "power.h" #include "file.h" -/* Size of the buffer to store the loaded Rockbox/iriver image */ -#define MAX_LOADSIZE (5*1024*1024) +/* Size of the buffer to store the loaded firmware image */ +#define MAX_LOADSIZE (10*1024*1024) /* A buffer to load the iriver firmware or Rockbox into */ unsigned char loadbuffer[MAX_LOADSIZE]; @@ -52,18 +52,18 @@ char version[] = APPSVERSION; int line=0; -/* Load original iriver firmware. This function expects a file called - "/System/Original.mi4" on the player. It should be decrypted - and have the header stripped using mi4code. It reads the file in to a memory +/* Load original mi4 firmware. This function expects a file called + "/System/OF.bin" on the player. It should be a mi4 firmware decrypted + and header stripped using mi4code. It reads the file in to a memory buffer called buf. The rest of the loading is done in main() and crt0.S */ -int load_iriver(unsigned char* buf) +int load_original_firmware(unsigned char* buf) { int fd; int rc; int len; - fd = open("/System/Original.mi4", O_RDONLY); + fd = open("/System/OF.bin", O_RDONLY); len = filesize(fd); @@ -78,7 +78,7 @@ int load_iriver(unsigned char* buf) return len; } -/* Load Rockbox firmware (rockbox.h10) */ +/* Load Rockbox firmware (rockbox.*) */ int load_rockbox(unsigned char* buf) { int fd; @@ -164,6 +164,7 @@ void* main(void) kernel_init(); lcd_init(); font_init(); + button_init(); line=0; @@ -172,7 +173,7 @@ void* main(void) lcd_puts(0, line++, "Rockbox boot loader"); snprintf(buf, sizeof(buf), "Version: 20%s", version); lcd_puts(0, line++, buf); - snprintf(buf, sizeof(buf), "iriver H10"); + snprintf(buf, sizeof(buf), MODEL_NAME); lcd_puts(0, line++, buf); lcd_update(); @@ -212,11 +213,11 @@ void* main(void) i=button_read_device(); if(i==BUTTON_LEFT) { - lcd_puts(0, line, "Loading iriver firmware..."); + lcd_puts(0, line++, "Loading original firmware..."); lcd_update(); - rc=load_iriver(loadbuffer); + rc=load_original_firmware(loadbuffer); } else { - lcd_puts(0, line, "Loading Rockbox..."); + lcd_puts(0, line++, "Loading Rockbox..."); lcd_update(); rc=load_rockbox(loadbuffer); } @@ -225,6 +226,7 @@ void* main(void) snprintf(buf, sizeof(buf), "Rockbox error: %d",rc); lcd_puts(0, line++, buf); lcd_update(); + while(1) {} } memcpy((void*)DRAM_START,loadbuffer,rc); diff --git a/firmware/SOURCES b/firmware/SOURCES index f83abdbc51..386d3707c4 100644 --- a/firmware/SOURCES +++ b/firmware/SOURCES @@ -262,11 +262,13 @@ drivers/i2c-pnx0101.c /* no i2c driver yet */ #endif #if defined(CPU_PP) -#ifndef BOOTLOADER +#ifdef BOOTLOADER +target/arm/crt0-pp-bl.S +#else target/arm/pcm-pp.c target/arm/audio-pp.c -#endif target/arm/crt0-pp.S +#endif #elif defined(CPU_ARM) target/arm/crt0.S #endif /* defined(CPU_*) */ diff --git a/firmware/boot.lds b/firmware/boot.lds index 556e8db990..6c307bd4de 100644 --- a/firmware/boot.lds +++ b/firmware/boot.lds @@ -8,7 +8,7 @@ INPUT(target/coldfire/crt0.o) OUTPUT_FORMAT(elf32-littlearm) OUTPUT_ARCH(arm) #ifdef CPU_PP -INPUT(target/arm/crt0-pp.o) +INPUT(target/arm/crt0-pp-bl.o) #else INPUT(target/arm/crt0.o) #endif diff --git a/firmware/export/config-e200.h b/firmware/export/config-e200.h index 26b87c70fc..4c9e1b2d47 100644 --- a/firmware/export/config-e200.h +++ b/firmware/export/config-e200.h @@ -5,6 +5,7 @@ /* For Rolo and boot loader */ #define MODEL_NUMBER 16 +#define MODEL_NAME "Sandisk Sansa e200" /* define this if you have recording possibility */ /*#define HAVE_RECORDING 1*/ /* TODO: add support for this */ diff --git a/firmware/export/config-h10.h b/firmware/export/config-h10.h index 0b17920736..ae2a150ae6 100644 --- a/firmware/export/config-h10.h +++ b/firmware/export/config-h10.h @@ -6,6 +6,7 @@ /* For Rolo and boot loader */ #define MODEL_NUMBER 13 +#define MODEL_NAME "iriver H10 20GB" /* define this if you have recording possibility */ #define HAVE_RECORDING 1 diff --git a/firmware/export/config-h10_5gb.h b/firmware/export/config-h10_5gb.h index 534c4a455f..42f774832a 100644 --- a/firmware/export/config-h10_5gb.h +++ b/firmware/export/config-h10_5gb.h @@ -6,6 +6,7 @@ /* For Rolo and boot loader */ #define MODEL_NUMBER 14 +#define MODEL_NAME "iriver H10 5/6GB" /* define this if you have recording possibility */ #define HAVE_RECORDING 1 diff --git a/firmware/rolo.c b/firmware/rolo.c index 6f7bae90c9..84b3280da5 100644 --- a/firmware/rolo.c +++ b/firmware/rolo.c @@ -31,9 +31,8 @@ #include "buffer.h" #if !defined(IRIVER_IFP7XX_SERIES) && \ - (CONFIG_CPU != PP5002) && !defined(IRIVER_H10) && \ - !defined(IRIVER_H10_5GB) && (CONFIG_CPU != S3C2440) -/* FIX: this doesn't work on iFP, 3rd Gen ipods, or H10 yet */ + (CONFIG_CPU != PP5002) && (CONFIG_CPU != S3C2440) +/* FIX: this doesn't work on iFP, 3rd Gen ipods */ #define IRQ0_EDGE_TRIGGER 0x80 diff --git a/firmware/target/arm/crt0-pp-bl.S b/firmware/target/arm/crt0-pp-bl.S new file mode 100644 index 0000000000..4f50cac699 --- /dev/null +++ b/firmware/target/arm/crt0-pp-bl.S @@ -0,0 +1,179 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2002 by Linus Nielsen Feltzing + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "config.h" +#include "cpu.h" + + .section .init.text,"ax",%progbits + + .global start +start: + +/* PortalPlayer bootloader and startup code based on startup.s from the iPodLinux + * loader + * + * Copyright (c) 2003, Daniel Palffy (dpalffy (at) rainstorm.org) + * Copyright (c) 2005, Bernard Leach + * + */ +#if CONFIG_CPU == PP5002 + .equ PROC_ID, 0xc4000000 + .equ COP_CTRL, 0xcf004058 + .equ COP_STATUS, 0xcf004050 + .equ IIS_CONFIG, 0xc0002500 + .equ SLEEP, 0xca + .equ WAKE, 0xce + .equ SLEEPING, 0x4000 +#else + .equ PROC_ID, 0x60000000 + .equ COP_CTRL, 0x60007004 + .equ COP_STATUS, 0x60007004 + .equ IIS_CONFIG, 0x70002800 + .equ SLEEP, 0x80000000 + .equ WAKE, 0x0 + .equ SLEEPING, 0x80000000 + .equ CACHE_CTRL, 0x6000c000 +#endif + + msr cpsr_c, #0xd3 /* enter supervisor mode, disable IRQ */ + +/* 1 - Copy the bootloader to IRAM */ + /* get the high part of our execute address */ + ldr r7, =0xffffff00 + and r4, pc, r7 + + /* Copy bootloader to safe area - 0x40000000 (IRAM) */ + mov r5, #0x40000000 + ldr r6, = _dataend +1: + cmp r5, r6 + ldrcc r2, [r4], #4 + strcc r2, [r5], #4 + bcc 1b + +#ifndef IPOD_ARCH + /* For builds on targets with mi4 firmware, scramble writes data to + 0xe0-0xeb, so jump past that.*/ + b pad_skip + +.space 60*4 + +pad_skip: +#endif + + +/* 2 - Jump both CPU and COP there */ + ldr pc, =start_loc /* jump to the relocated start_loc: */ + +start_loc: + + /* Find out which processor we are */ + ldr r0, =PROC_ID + ldr r0, [r0] + and r0, r0, #0xff + cmp r0, #0x55 + beq cpu + + /* put us (co-processor) to sleep */ + ldr r4, =COP_CTRL + mov r3, #SLEEP + str r3, [r4] + ldr pc, =cop_wake_start + +cop_wake_start: +#if CONFIG_CPU != PP5002 + /* COP: Invalidate cache */ + ldr r0, =0xf000f044 + ldr r1, [r0] + orr r1, r1, #0x6 + str r1, [r0] + + ldr r0, =CACHE_CTRL +1: + ldr r1, [r0] + tst r1, #0x8000 + bne 1b +#endif + + ldr r0, =startup_loc + ldr pc, [r0] + +cpu: + /* Wait for COP to be sleeping */ + ldr r4, =COP_STATUS +1: + ldr r3, [r4] + ands r3, r3, #SLEEPING + beq 1b + + /* Initialise bss section to zero */ + ldr r2, =_edata + ldr r3, =_end + mov r4, #0 +1: + cmp r3, r2 + strhi r4, [r2], #4 + bhi 1b + + /* Set up some stack and munge it with 0xdeadbeef */ + ldr sp, =stackend + mov r3, sp + ldr r2, =stackbegin + ldr r4, =0xdeadbeef +1: + cmp r3, r2 + strhi r4, [r2], #4 + bhi 1b + + /* execute the loader - this will load an image to 0x10000000 */ + bl main + + ldr r1, =startup_loc + str r0, [r1] + +#if CONFIG_CPU != PP5002 + /* Flush cache */ + ldr r3, =0xf000f044 + ldr r4, [r3] + orr r4, r4, #0x2 + str r4, [r3] + + ldr r3, =CACHE_CTRL +1: + ldr r4, [r3] + tst r4, #0x8000 + bne 1b +#endif + + /* Wake up the coprocessor before executing the firmware */ + ldr r4, =COP_CTRL + mov r3, #WAKE + str r3, [r4] + + mov pc, r0 + +startup_loc: + .word 0x0 + +#ifdef IPOD_ARCH +.align 8 /* starts at 0x100 */ +.global boot_table +boot_table: + /* here comes the boot table, don't move its offset */ + .space 400 +#endif diff --git a/firmware/target/arm/crt0-pp.S b/firmware/target/arm/crt0-pp.S index 17b1e8a4a3..892275e411 100644 --- a/firmware/target/arm/crt0-pp.S +++ b/firmware/target/arm/crt0-pp.S @@ -52,15 +52,9 @@ start: msr cpsr_c, #0xd3 /* enter supervisor mode, disable IRQ */ -#ifndef BOOTLOADER b pad_skip -#if defined(SANSA_E200) -/* mi4tool writes junk between 0xe0 and 0xeb. Avoid this. */ -.space 60*4 /* (more than enough) space for exception vectors */ -#else -.space 50*4 -#endif +.space 50*4 /* (more than enough) space for exception vectors */ pad_skip: #ifdef SANSA_E200 @@ -108,11 +102,13 @@ remap_end: /* After doing the remapping, send the COP to sleep. On wakeup it will go to cop_init */ + + /* Find out which processor we are */ ldr r0, =PROC_ID ldr r0, [r0] and r0, r0, #0xff cmp r0, #0x55 - beq 1f + beq cpu_init /* put us (co-processor) to sleep */ ldr r4, =COP_CTRL @@ -121,9 +117,15 @@ remap_end: ldr pc, =cop_init -1: -#ifndef DEBUG +cpu_init: + /* Wait for COP to be sleeping */ + ldr r4, =COP_STATUS +1: + ldr r3, [r4] + ands r3, r3, #SLEEPING + beq 1b + /* Copy exception handler code to address 0 */ ldr r2, =_vectorsstart ldr r3, =_vectorsend @@ -133,15 +135,7 @@ remap_end: ldrhi r5, [r4], #4 strhi r5, [r2], #4 bhi 1b -#else - ldr r1, =vectors - ldr r0, =irq_handler - str r0, [r1, #24] - ldr r0, =fiq_handler - str r0, [r1, #28] -#endif -#ifndef STUB /* Zero out IBSS */ ldr r2, =_iedata ldr r3, =_iend @@ -160,8 +154,6 @@ remap_end: ldrhi r5, [r2], #4 strhi r5, [r3], #4 bhi 1b -#endif /* !STUB */ -#endif /* !BOOTLOADER */ /* Initialise bss section to zero */ ldr r2, =_edata @@ -181,90 +173,6 @@ remap_end: cmp r3, r2 strhi r4, [r2], #4 bhi 1b - -#ifdef BOOTLOADER - /* TODO: the high part of the address is probably dependent on CONFIG_CPU. - Since we tend to use ifdefs for each chipset target - anyway, we might as well just hardcode it here. - */ - - /* get the high part of our execute address */ - ldr r0, =0xff000000 - and r8, pc, r0 @ r8 is used later - - /* Find out which processor we are */ - mov r0, #PROC_ID - ldr r0, [r0] - and r0, r0, #0xff - cmp r0, #0x55 - beq 1f - - /* put us (co-processor) to sleep */ - ldr r4, =COP_CTRL - mov r3, #SLEEP - str r3, [r4] - ldr pc, =cop_wake_start - -cop_wake_start: - /* jump the COP to startup */ - ldr r0, =startup_loc - ldr pc, [r0] - -1: - - /* get the high part of our execute address */ - ldr r2, =0xffffff00 - and r4, pc, r2 - - /* Copy bootloader to safe area - 0x40000000 */ - mov r5, #0x40000000 - ldr r6, = _dataend - sub r0, r6, r5 /* length of loader */ - add r0, r4, r0 /* r0 points to start of loader */ -1: - cmp r5, r6 - ldrcc r2, [r4], #4 - strcc r2, [r5], #4 - bcc 1b - - ldr pc, =start_loc /* jump to the relocated start_loc: */ - -start_loc: - - /* execute the loader - this will load an image to 0x10000000 */ - bl main - - /* Wake up the coprocessor before executing the firmware */ - - /* save the startup address for the COP */ - ldr r1, =startup_loc - str r0, [r1] - - /* make sure COP is sleeping */ - ldr r4, =COP_STATUS -1: - ldr r3, [r4] - ands r3, r3, #SLEEPING - beq 1b - - /* wake up COP */ - ldr r4, =COP_CTRL - mov r3, #WAKE - str r3, [r4] - - /* jump to start location */ - mov pc, r0 - -startup_loc: - .word 0x0 - -.align 8 /* starts at 0x100 */ -.global boot_table -boot_table: - /* here comes the boot table, don't move its offset */ - .space 400 - -#else /* BOOTLOADER */ /* Set up stack for IRQ mode */ msr cpsr_c, #0xd2 @@ -290,6 +198,21 @@ boot_table: /* main() should never return */ cop_init: +#if CONFIG_CPU != PP5002 + /* COP: Invalidate cache */ + ldr r0, =0xf000f044 + ldr r1, [r0] + orr r1, r1, #0x6 + str r1, [r0] + + ldr r0, =0x6000c000 +1: + ldr r1, [r0] + tst r1, #0x8000 + bne 1b +#endif + + /* Setup stack for COP */ ldr sp, =cop_stackend mov r3, sp ldr r2, =cop_stackbegin @@ -300,6 +223,8 @@ cop_init: bhi 2b ldr sp, =cop_stackend + + /* Run cop_main() in apps/main.c */ bl cop_main /* Exception handlers. Will be copied to address 0 after memory remapping */ @@ -385,5 +310,3 @@ irq_stack: /* 256 words of FIQ stack */ .space 256*4 fiq_stack: - -#endif /* BOOTLOADER */ diff --git a/tools/configure b/tools/configure index 3a5c7352a6..4cb1f96291 100755 --- a/tools/configure +++ b/tools/configure @@ -1108,10 +1108,10 @@ EOF target="-DSANSA_E200" memory=32 # supposedly arm7tdmicc - tool="$rootdir/tools/scramble -mi4v3" + tool="$rootdir/tools/scramble -add=e200" bmp2rb_mono="$rootdir/tools/bmp2rb -f 0" bmp2rb_native="$rootdir/tools/bmp2rb -f 4" - output="PP5022.mi4" + output="rockbox.e200" appextra="recorder:gui" archosrom="" flash="" diff --git a/tools/scramble.c b/tools/scramble.c index 30d4ea9edb..fed19621f8 100644 --- a/tools/scramble.c +++ b/tools/scramble.c @@ -89,7 +89,7 @@ void usage(void) "\t-mi4v3 PortalPlayer .mi4 format (revision 010301)\n" "\t-add=X Rockbox generic \"add-up\" checksum format\n" "\t (X values: h100, h120, h140, h300, ipco, nano, ipvd\n" - "\t ip3g, ip4g, mini, x5, h10, h10_5gb)\n" + "\t ip3g, ip4g, mini, x5, h10, h10_5gb, tpj2, e200)\n" "\nNo option results in Archos standard player/recorder format.\n"); exit(1); @@ -207,6 +207,8 @@ int main (int argc, char** argv) modelnum = 14; else if(!strcmp(&argv[1][5], "tpj2")) modelnum = 15; + else if(!strcmp(&argv[1][5], "e200")) + modelnum = 16; else { fprintf(stderr, "unsupported model: %s\n", &argv[1][5]); return 2;