From 1b8542490da3283dfa0ce0f3363f16eab0609815 Mon Sep 17 00:00:00 2001 From: Aidan MacDonald Date: Wed, 7 Apr 2021 22:11:01 +0100 Subject: [PATCH] x1000: Redesign SPL, and allow it to flash the bootloader SPL is now designed so core X1000 code is in control of the boot, under the reasonable assumption that the device boots from flash. It should not be too hard to adapt to other X1000 ports. The biggest functional change is that the SPL can now read/write the flash, under the control of a host computer. The SPL relies on the boot ROM for USB communication, so the host has to execute the SPL multiple times following a protocol. Change-Id: I3ffaa00e4bf191e043c9df0e2e64d15193ff42c9 --- bootloader/SOURCES | 7 +- firmware/SOURCES | 6 + .../mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c | 110 +++----------- .../mips/ingenic_x1000/fiiom3k/spl-target.h | 29 ++++ .../mips/ingenic_x1000/spl-x1000-defs.h | 66 +++++++++ .../target/mips/ingenic_x1000/spl-x1000.c | 138 ++++++++++++++---- .../target/mips/ingenic_x1000/spl-x1000.h | 49 +++++++ 7 files changed, 279 insertions(+), 126 deletions(-) rename bootloader/fiiom3k-spl.c => firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c (57%) create mode 100644 firmware/target/mips/ingenic_x1000/fiiom3k/spl-target.h create mode 100644 firmware/target/mips/ingenic_x1000/spl-x1000-defs.h rename bootloader/x1000-spl.c => firmware/target/mips/ingenic_x1000/spl-x1000.c (65%) create mode 100644 firmware/target/mips/ingenic_x1000/spl-x1000.h diff --git a/bootloader/SOURCES b/bootloader/SOURCES index db9e05644c..446bdac0e1 100644 --- a/bootloader/SOURCES +++ b/bootloader/SOURCES @@ -89,11 +89,6 @@ show_logo.c #elif defined(SANSA_CONNECT) sansaconnect.c show_logo.c -#elif defined(FIIO_M3K) -#ifdef BOOTLOADER_SPL -x1000-spl.c -fiiom3k-spl.c -#else +#elif defined(FIIO_M3K) && !defined(BOOTLOADER_SPL) fiiom3k.c #endif -#endif diff --git a/firmware/SOURCES b/firmware/SOURCES index 3a42381003..ce3d8d52e2 100644 --- a/firmware/SOURCES +++ b/firmware/SOURCES @@ -1747,6 +1747,9 @@ target/mips/ingenic_x1000/msc-x1000.c #if (CONFIG_STORAGE & STORAGE_SD) target/mips/ingenic_x1000/sd-x1000.c #endif +#ifdef BOOTLOADER_SPL +target/mips/ingenic_x1000/spl-x1000.c +#endif #endif /* CONFIG_CPU == X1000 */ #if defined(ONDA_VX747) || defined(ONDA_VX747P) || defined(ONDA_VX777) @@ -1780,6 +1783,9 @@ target/mips/ingenic_x1000/fiiom3k/installer-fiiom3k.c target/mips/ingenic_x1000/fiiom3k/lcd-fiiom3k.c target/mips/ingenic_x1000/fiiom3k/nand-fiiom3k.c target/mips/ingenic_x1000/fiiom3k/power-fiiom3k.c +#ifdef BOOTLOADER_SPL +target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c +#endif #endif /* FIIO_M3K */ #if defined(LYRE_PROTO1) diff --git a/bootloader/fiiom3k-spl.c b/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c similarity index 57% rename from bootloader/fiiom3k-spl.c rename to firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c index 67b4b0a59c..0ebe11e24d 100644 --- a/bootloader/fiiom3k-spl.c +++ b/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c @@ -19,28 +19,16 @@ * ****************************************************************************/ -#include "config.h" -#include "nand-x1000.h" +#include "spl-x1000.h" #include "gpio-x1000.h" -#include "mmu-mips.h" +#include "nand-x1000.h" +#include "system.h" #include -/* "fiio" in little endian */ -#define BOOTMAGIC 0x6f696966 - -/* Argument structure needed by Linux */ -struct linux_kargs { - void* arg0; - void* arg1; -}; - -#define LINUX_KARGSADDR 0x80004000 - -static const char recovery_cmdline[] = "mem=xxM@0x0\ - no_console_suspend\ - console=ttyS2,115200n8\ - lpj=5009408\ - ip=off"; +/* Boot select button state must remain stable for this duration + * before the choice will be accepted. Currently 100ms. + */ +#define BTN_STABLE_TIME (100 * (X1000_EXCLK_FREQ / 4000)) static const char normal_cmdline[] = "mem=64M@0x0\ no_console_suspend\ @@ -55,18 +43,13 @@ static const char normal_cmdline[] = "mem=64M@0x0\ rw\ loglevel=8"; -#define BOOTOPTION_ROCKBOX 0 -#define BOOTOPTION_FIIOLINUX 1 -#define BOOTOPTION_RECOVERY 2 -#define NUM_BOOTOPTIONS 3 +static const char recovery_cmdline[] = "mem=64M@0x0\ + no_console_suspend\ + console=ttyS2,115200n8\ + lpj=5009408\ + ip=off"; -static const struct bootoption { - uint32_t nand_addr; - uint32_t nand_size; - unsigned long load_addr; - unsigned long exec_addr; - const char* cmdline; -} boot_options[NUM_BOOTOPTIONS] = { +const struct spl_boot_option spl_boot_options[] = { { /* Rockbox: the first unused NAND page is 26 KiB in, and the * remainder of the block is unused, giving us 102 KiB to use. @@ -95,10 +78,7 @@ static const struct bootoption { }, }; -/* Simple diagnostic if something goes wrong -- a little nicer than wondering - * what's going on when the machine hangs - */ -void die(void) +void spl_error(void) { const int pin = (1 << 24); @@ -119,12 +99,7 @@ void die(void) } } -/* Boot select button state must remain stable for this duration - * before the choice will be accepted. Currently 100ms. - */ -#define BTN_STABLE_TIME (100 * (X1000_EXCLK_FREQ / 4000)) - -int get_boot_option(void) +int spl_get_boot_option(void) { const uint32_t pinmask = (1 << 17) | (1 << 19); @@ -146,61 +121,12 @@ int get_boot_option(void) /* Play button boots original firmware */ if(pin == (1 << 17)) - return BOOTOPTION_FIIOLINUX; + return SPL_BOOTOPT_ORIG_FW; /* Volume up boots recovery */ if(pin == (1 << 19)) - return BOOTOPTION_RECOVERY; + return SPL_BOOTOPT_RECOVERY; /* Default is to boot Rockbox */ - return BOOTOPTION_ROCKBOX; -} - -void spl_main(void) -{ - /* Get user boot option */ - int booti = get_boot_option(); - const struct bootoption* opt = &boot_options[booti]; - - /* Load selected firmware from flash */ - if(nand_open()) - die(); - if(nand_read_bytes(opt->nand_addr, opt->nand_size, (void*)opt->load_addr)) - die(); - - if(booti == BOOTOPTION_ROCKBOX) { - /* If bootloader is not installed, return back to boot ROM. - * Also read in the first eraseblock of NAND flash so it can be - * dumped back over USB. - */ - if(*(unsigned*)(opt->load_addr + 4) != BOOTMAGIC) { - nand_read_bytes(0, 128 * 1024, (void*)0x80000000); - commit_discard_idcache(); - return; - } - } else { - /* TODO: Linux boot not implemented yet - * - * - Have to initialize UART2, as it's used for the serial console - * - Must initialize APLL and change clocks over - * - There are some other clocks which need to be initialized - * - We should turn off OST since the OF SPL does not turn it on - */ - die(); - } - - if(boot_options[booti].cmdline) { - /* Handle Linux command line arguments */ - struct linux_kargs* kargs = (struct linux_kargs*)LINUX_KARGSADDR; - kargs->arg0 = 0; - kargs->arg1 = (void*)boot_options[booti].cmdline; - } - - /* Flush caches and jump to address */ - void* execaddr = (void*)opt->exec_addr; - commit_discard_idcache(); - __asm__ __volatile__ ("jr %0\n" - "nop\n" - :: "r"(execaddr)); - __builtin_unreachable(); + return SPL_BOOTOPT_ROCKBOX; } diff --git a/firmware/target/mips/ingenic_x1000/fiiom3k/spl-target.h b/firmware/target/mips/ingenic_x1000/fiiom3k/spl-target.h new file mode 100644 index 0000000000..ac90508f44 --- /dev/null +++ b/firmware/target/mips/ingenic_x1000/fiiom3k/spl-target.h @@ -0,0 +1,29 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2021 Aidan MacDonald + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#ifndef __SPL_TARGET_H__ +#define __SPL_TARGET_H__ + +#define SPL_DDR_MEMORYSIZE 64 +#define SPL_DDR_AUTOSR_EN 1 +#define SPL_DDR_NEED_BYPASS 1 + +#endif /* __SPL_TARGET_H__ */ diff --git a/firmware/target/mips/ingenic_x1000/spl-x1000-defs.h b/firmware/target/mips/ingenic_x1000/spl-x1000-defs.h new file mode 100644 index 0000000000..1d9f120ee2 --- /dev/null +++ b/firmware/target/mips/ingenic_x1000/spl-x1000-defs.h @@ -0,0 +1,66 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2021 Aidan MacDonald + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#ifndef __SPL_X1000_DEFS_H__ +#define __SPL_X1000_DEFS_H__ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +#define SPL_CMD_BOOT 0 +#define SPL_CMD_FLASH_READ 1 +#define SPL_CMD_FLASH_WRITE 2 + +#define SPL_BOOTOPT_CHOOSE 0 +#define SPL_BOOTOPT_ROCKBOX 1 +#define SPL_BOOTOPT_ORIG_FW 2 +#define SPL_BOOTOPT_RECOVERY 3 +#define SPL_BOOTOPT_NONE 4 + +#define SPL_FLAG_SKIP_INIT (1 << 0) + +#define SPL_MAX_SIZE (12 * 1024) +#define SPL_LOAD_ADDRESS 0xf4001000 +#define SPL_EXEC_ADDRESS 0xf4001800 +#define SPL_ARGUMENTS_ADDRESS 0xf40011f0 +#define SPL_STATUS_ADDRESS 0xf40011e0 +#define SPL_BUFFER_ADDRESS 0xa0004000 + +struct x1000_spl_arguments { + uint32_t command; + uint32_t param1; + uint32_t param2; + uint32_t flags; +}; + +struct x1000_spl_status { + int err_code; + int reserved; +}; + +#ifdef __cplusplus +} +#endif + +#endif /* __SPL_X1000_DEFS_H__ */ diff --git a/bootloader/x1000-spl.c b/firmware/target/mips/ingenic_x1000/spl-x1000.c similarity index 65% rename from bootloader/x1000-spl.c rename to firmware/target/mips/ingenic_x1000/spl-x1000.c index 1c780a9843..59e0fb687d 100644 --- a/bootloader/x1000-spl.c +++ b/firmware/target/mips/ingenic_x1000/spl-x1000.c @@ -19,26 +19,26 @@ * ****************************************************************************/ -#include "system.h" +#include "spl-x1000.h" +#include "spl-target.h" #include "clk-x1000.h" +#include "nand-x1000.h" +#include "system.h" #include "x1000/cpm.h" #include "x1000/ost.h" #include "x1000/ddrc.h" #include "x1000/ddrc_apb.h" #include "x1000/ddrphy.h" -#ifdef FIIO_M3K -# define DDR_USE_AUTOSR 1 -# define DDR_NEED_BYPASS 1 -# define DDR_MEMORYSIZE 64 -#else -# error "Please add DDR definitions for new target!" -#endif +struct x1000_spl_arguments* const spl_arguments = + (struct x1000_spl_arguments*)SPL_ARGUMENTS_ADDRESS; -#define hang() do { } while(1) +struct x1000_spl_status* const spl_status = + (struct x1000_spl_status*)SPL_STATUS_ADDRESS; -/* Target-specific routine to load & execute the Rockbox bootloader */ -extern void spl_main(void); +/* defined to be Linux compatible; Rockbox needs no arguments so there + * is no harm in passing them and we save a little code size */ +typedef void(*entry_fn)(int, char**, int, int); /* Note: This is based purely on disassembly of the SPL from the FiiO M3K. * The code there is somewhat generic and corresponds roughly to Ingenic's @@ -95,9 +95,9 @@ static void ddr_init(void) while(i > 0 && REG_DDRPHY_PGSR != 7 && REG_DDRPHY_PGSR != 0x1f) i -= 1; if(i == 0) - hang(); + spl_error(); -#if DDR_NEED_BYPASS +#if SPL_DDR_NEED_BYPASS REG_DDRPHY_ACDLLCR = 0x80000000; REG_DDRPHY_DSGCR &= ~0x10; REG_DDRPHY_DLLGCR |= 0x800000; @@ -109,7 +109,7 @@ static void ddr_init(void) while(i > 0 && REG_DDRPHY_PGSR != 0xf && REG_DDRPHY_PGSR != 0x1f) i -= 1; if(i == 0) - hang(); + spl_error(); REG_DDRC_APB_PHYRST_CFG = 0x400000; mdelay(3); @@ -118,7 +118,7 @@ static void ddr_init(void) REG_DDRC_CFG = 0xa468aec; REG_DDRC_CTRL = 2; -#if DDR_NEED_BYPASS +#if SPL_DDR_NEED_BYPASS REG_DDRPHY_PIR = 0x20020081; #else REG_DDRPHY_PIR = 0x85; @@ -132,10 +132,10 @@ static void ddr_init(void) } if(i == 0) - hang(); + spl_error(); if((REG_DDRPHY_PGSR & 0x60) != 0 && REG_DDRPHY_PGSR != 0) - hang(); + spl_error(); REG_DDRC_CTRL = 0; REG_DDRC_CTRL = 10; @@ -147,10 +147,10 @@ static void ddr_init(void) REG_DDRC_TIMING4 = 0xb7a0251; REG_DDRC_TIMING5 = 0xff090200; REG_DDRC_TIMING6 = 0xa0a0202; -#if DDR_MEMORYSIZE == 64 +#if SPL_DDR_MEMORYSIZE == 64 REG_DDRC_MMAP0 = 0x20fc; REG_DDRC_MMAP1 = 0x2400; -#elif DDR_MEMORYSIZE == 32 +#elif SPL_DDR_MEMORYSIZE == 32 REG_DDRC_MMAP0 = 0x20fe; REG_DDRC_MMAP1 = 0x2200; #else @@ -160,13 +160,13 @@ static void ddr_init(void) REG_DDRC_REFCNT = 0x2f0003; REG_DDRC_CTRL = 0xc91e; -#if DDR_MEMORYSIZE == 64 +#if SPL_DDR_MEMORYSIZE == 64 REG_DDRC_REMAP1 = 0x03020c0b; REG_DDRC_REMAP2 = 0x07060504; REG_DDRC_REMAP3 = 0x000a0908; REG_DDRC_REMAP4 = 0x0f0e0d01; REG_DDRC_REMAP5 = 0x13121110; -#elif DDR_MEMORYSIZE == 32 +#elif SPL_DDR_MEMORYSIZE == 32 REG_DDRC_REMAP1 = 0x03020b0a; REG_DDRC_REMAP2 = 0x07060504; REG_DDRC_REMAP3 = 0x01000908; @@ -178,8 +178,8 @@ static void ddr_init(void) REG_DDRC_STATUS &= ~0x40; -#if DDR_USE_AUTOSR -#if DDR_NEED_BYPASS +#if SPL_DDR_AUTOSR_EN +#if SPL_DDR_NEED_BYPASS jz_writef(CPM_DDRCDR, GATE_EN(1)); REG_DDRC_APB_CLKSTP_CFG = 0x9000000f; #else @@ -187,10 +187,10 @@ static void ddr_init(void) #endif #endif - REG_DDRC_AUTOSR_EN = DDR_USE_AUTOSR; + REG_DDRC_AUTOSR_EN = SPL_DDR_AUTOSR_EN; } -void main(void) +static void init(void) { /* from original firmware SPL */ REG_CPM_PSWC0ST = 0x00; @@ -224,7 +224,89 @@ void main(void) /* init DDR memory */ ddr_init(); - - /* jump to the target's main routine */ - spl_main(); +} + +static int nandread(uint32_t addr, uint32_t size, void* buffer) +{ + int rc; + + if((rc = nand_open())) + return rc; + + rc = nand_read_bytes(addr, size, buffer); + nand_close(); + return rc; +} + +static int nandwrite(uint32_t addr, uint32_t size, void* buffer) +{ + int rc; + + if((rc = nand_open())) + return rc; + + if((rc = nand_enable_writes(true))) + goto _end; + + if((rc = nand_erase_bytes(addr, size))) + goto _end1; + + rc = nand_write_bytes(addr, size, buffer); + + _end1: + /* an error here is very unlikely, so ignore it */ + nand_enable_writes(false); + + _end: + nand_close(); + return rc; +} + +void main(void) +{ + if(!(SPL_ARGUMENTS->flags & SPL_FLAG_SKIP_INIT)) + init(); + + switch(SPL_ARGUMENTS->command) { + case SPL_CMD_BOOT: { + int option = SPL_ARGUMENTS->param1; + if(option == SPL_BOOTOPT_CHOOSE) + option = spl_get_boot_option(); + if(option == SPL_BOOTOPT_NONE) + return; + + const struct spl_boot_option* opt = &spl_boot_options[option-1]; + if(nandread(opt->nand_addr, opt->nand_size, (void*)opt->load_addr)) + spl_error(); + + /* TODO: implement dual boot */ + + /* Reading the Linux command line from the bootloader is handled by + * arch/mips/xburst/core/prom.c -- see Ingenic kernel sources. + * + * Rockbox doesn't use arguments, but passing them does not hurt and it + * saves an unnecessary branch. + */ + entry_fn entry = (entry_fn)opt->exec_addr; + char** argv = (char**)0x80004000; + argv[0] = 0; + argv[1] = (char*)opt->cmdline; + + commit_discard_idcache(); + entry(2, argv, 0, 0); + __builtin_unreachable(); + } + + case SPL_CMD_FLASH_READ: + SPL_STATUS->err_code = nandread(SPL_ARGUMENTS->param1, + SPL_ARGUMENTS->param2, + (void*)SPL_BUFFER_ADDRESS); + return; + + case SPL_CMD_FLASH_WRITE: + SPL_STATUS->err_code = nandwrite(SPL_ARGUMENTS->param1, + SPL_ARGUMENTS->param2, + (void*)SPL_BUFFER_ADDRESS); + return; + } } diff --git a/firmware/target/mips/ingenic_x1000/spl-x1000.h b/firmware/target/mips/ingenic_x1000/spl-x1000.h new file mode 100644 index 0000000000..44601438f3 --- /dev/null +++ b/firmware/target/mips/ingenic_x1000/spl-x1000.h @@ -0,0 +1,49 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2021 Aidan MacDonald + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#ifndef __SPL_X1000_H__ +#define __SPL_X1000_H__ + +#include "spl-x1000-defs.h" + +#define SPL_ARGUMENTS ((struct x1000_spl_arguments*)SPL_ARGUMENTS_ADDRESS) +#define SPL_STATUS ((struct x1000_spl_status*)SPL_STATUS_ADDRESS) + +struct spl_boot_option { + uint32_t nand_addr; + uint32_t nand_size; + uint32_t load_addr; + uint32_t exec_addr; + const char* cmdline; /* for Linux */ +}; + +/* Defined by target, indices are 0 = ROCKBOX, 1 = ORIG_FW, etc... */ +extern const struct spl_boot_option spl_boot_options[]; + +/* Called on a fatal error */ +void spl_error(void) __attribute__((noreturn)); + +/* When SPL boots with SPL_BOOTOPTION_CHOOSE, this function is invoked + * to let the target figure out the boot option based on buttons the + * user is pressing */ +extern int spl_get_boot_option(void); + +#endif /* __SPL_X1000_H__ */