rockbox/lib/rbcodec/rbcodecconfig-example.h

#ifndef RBCODECCONFIG_H_INCLUDED
#define RBCODECCONFIG_H_INCLUDED

#define HAVE_PITCHCONTROL
#define HAVE_SW_TONE_CONTROLS
#define HAVE_ALBUMART
#define NUM_CORES 1
/* All the same unless a configuration option is added to warble */
#define DSP_OUT_MIN_HZ     44100
#define DSP_OUT_DEFAULT_HZ 44100
#define DSP_OUT_MAX_HZ     44100

#ifndef __ASSEMBLER__

/* {,u}int{8,16,32,64}_t, {,U}INT{8,16,32,64}_{MIN,MAX}, intptr_t, uintptr_t */
#include <inttypes.h>

/* bool, true, false */
#include <stdbool.h>

/* NULL, offsetof, size_t */
#include <stddef.h>

/* ssize_t, off_t, open, close, read, lseek, SEEK_SET, SEEK_CUR, SEEK_END */
#include <unistd.h>

/* MAX_PATH, {UCHAR,USHRT,UINT,ULONG,SCHAR,SHRT,INT,LONG}_{MIN,MAX} */
#include <limits.h>
// FIXME changing MAX_PATH is broken for now
//#define MAX_PATH PATH_MAX
// set same as rb to avoid dragons
#define MAX_PATH 260
#endif

#endif
Add rbcodecplatform.h and rbcodecconfig.h. librbcodec users must provide these two files when the library is built. rbcodecconfig.h provides configuration #defines and basic types, and will be included by public librbcodec headers, so it must not conflict with the user's code. rbcodecplatform.h provides various OS functions, and will only be included by source files and private headers. This system is intended to provide maximum flexibility for use on embedded systems, where no operating system headers are included. Unix systems can just copy rbcodecconfig-example.h and rbcodecplatform-unix.h with minimal changes. Change-Id: I350a2274d173da391fd1ca00c4202e9760d91def Reviewed-on: http://gerrit.rockbox.org/143 Reviewed-by: Nils Wallménius <nils@rockbox.org> Tested-by: Nils Wallménius <nils@rockbox.org> 2011-10-30 16:05:04 +00:00			`#ifndef RBCODECCONFIG_H_INCLUDED`
			`#define RBCODECCONFIG_H_INCLUDED`

Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROL Also move the definition to config.h Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff Reviewed-on: http://gerrit.rockbox.org/234 Reviewed-by: Nils Wallménius <nils@rockbox.org> 2012-05-08 14:34:26 +00:00			`#define HAVE_PITCHCONTROL`
Add rbcodecplatform.h and rbcodecconfig.h. librbcodec users must provide these two files when the library is built. rbcodecconfig.h provides configuration #defines and basic types, and will be included by public librbcodec headers, so it must not conflict with the user's code. rbcodecplatform.h provides various OS functions, and will only be included by source files and private headers. This system is intended to provide maximum flexibility for use on embedded systems, where no operating system headers are included. Unix systems can just copy rbcodecconfig-example.h and rbcodecplatform-unix.h with minimal changes. Change-Id: I350a2274d173da391fd1ca00c4202e9760d91def Reviewed-on: http://gerrit.rockbox.org/143 Reviewed-by: Nils Wallménius <nils@rockbox.org> Tested-by: Nils Wallménius <nils@rockbox.org> 2011-10-30 16:05:04 +00:00			`#define HAVE_SW_TONE_CONTROLS`
			`#define HAVE_ALBUMART`
			`#define NUM_CORES 1`
Enable setting of global output samplerate on certain targets. Replaces the NATIVE_FREQUENCY constant with a configurable frequency. The user may select 48000Hz if the hardware supports it. The default is still 44100Hz and the minimum is 44100Hz. The setting is located in the playback settings, under "Frequency". "Frequency" was duplicated in english.lang for now to avoid having to fix every .lang file for the moment and throwing everything out of sync because of the new play_frequency feature in features.txt. The next cleanup should combine it with the one included for recording and generalize the ID label. If the hardware doesn't support 48000Hz, no setting will be available. On particular hardware where very high rates are practical and desireable, the upper bound can be extended by patching. The PCM mixer can be configured to play at the full hardware frequency range. The DSP core can configure to the hardware minimum up to the maximum playback setting (some buffers must be reserved according to the maximum rate). If only 44100Hz is supported or possible on a given target for playback, using the DSP and mixer at other samperates is possible if the hardware offers them. Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622 Reviewed-on: http://gerrit.rockbox.org/479 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested-by: Michael Sevakis <jethead71@rockbox.org> 2013-05-23 17:58:51 +00:00			`/* All the same unless a configuration option is added to warble */`
			`#define DSP_OUT_MIN_HZ 44100`
			`#define DSP_OUT_DEFAULT_HZ 44100`
			`#define DSP_OUT_MAX_HZ 44100`
Add rbcodecplatform.h and rbcodecconfig.h. librbcodec users must provide these two files when the library is built. rbcodecconfig.h provides configuration #defines and basic types, and will be included by public librbcodec headers, so it must not conflict with the user's code. rbcodecplatform.h provides various OS functions, and will only be included by source files and private headers. This system is intended to provide maximum flexibility for use on embedded systems, where no operating system headers are included. Unix systems can just copy rbcodecconfig-example.h and rbcodecplatform-unix.h with minimal changes. Change-Id: I350a2274d173da391fd1ca00c4202e9760d91def Reviewed-on: http://gerrit.rockbox.org/143 Reviewed-by: Nils Wallménius <nils@rockbox.org> Tested-by: Nils Wallménius <nils@rockbox.org> 2011-10-30 16:05:04 +00:00
			`#ifndef __ASSEMBLER__`

			`/* {,u}int{8,16,32,64}_t, {,U}INT{8,16,32,64}_{MIN,MAX}, intptr_t, uintptr_t */`
			`#include <inttypes.h>`

			`/* bool, true, false */`
			`#include <stdbool.h>`

			`/* NULL, offsetof, size_t */`
			`#include <stddef.h>`

			`/* ssize_t, off_t, open, close, read, lseek, SEEK_SET, SEEK_CUR, SEEK_END */`
			`#include <unistd.h>`

			`/* MAX_PATH, {UCHAR,USHRT,UINT,ULONG,SCHAR,SHRT,INT,LONG}_{MIN,MAX} */`
			`#include <limits.h>`
			`// FIXME changing MAX_PATH is broken for now`
			`//#define MAX_PATH PATH_MAX`
			`// set same as rb to avoid dragons`
			`#define MAX_PATH 260`
			`#endif`

			`#endif`