Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/samsungypr1.h

165 lines
4.4 KiB
C
Raw Normal View History

Samsung YP-R1 target port This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
2013-09-10 20:48:34 +00:00
/*
* This config file is for the RockBox as application on the Samsung YP-R1 player.
* The target name for ifdefs is: SAMSUNG_YPR1; or CONFIG_PLATFORM & PLAFTORM_YPR1
*/
/* We don't run on hardware directly */
/* YP-R1 need it too of course */
yp-r1: Fix some of the simulator build issues. Change-Id: I167b801acaff9d36f3fd2fa57ba295d05816c60d
2020-07-07 18:33:17 +00:00
#ifndef SIMULATOR
Samsung YP-R1 target port This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
2013-09-10 20:48:34 +00:00
#define CONFIG_PLATFORM (PLATFORM_HOSTED)
yp-r1: Fix some of the simulator build issues. Change-Id: I167b801acaff9d36f3fd2fa57ba295d05816c60d
2020-07-07 18:33:17 +00:00
#endif
Samsung YP-R1 target port This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
2013-09-10 20:48:34 +00:00
/* For Rolo and boot loader */
#define MODEL_NUMBER 101
#define MODEL_NAME "Samsung YP-R1"
[4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. Note: I left behind lcd_bitmap in features.txt, because removing it would require considerable work in the manual and the translations. Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
2020-07-17 14:31:31 +00:00
Samsung YP-R1 target port This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
2013-09-10 20:48:34 +00:00
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* Define this if the LCD can shut down */
#define HAVE_LCD_SHUTDOWN
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* We try to support both orientation, looking forward for a future dynamic switch */
#define CONFIG_ORIENTATION SCREEN_PORTRAIT
/* LCD dimensions */
#if CONFIG_ORIENTATION == SCREEN_PORTRAIT
#define LCD_WIDTH 240
#define LCD_HEIGHT 400
#else
#define LCD_WIDTH 400
#define LCD_HEIGHT 240
#endif
lcd-24bit: Introduce a 24-bit mid-level LCD driver With LCD driver all calculation will be performed on RGB888 and the hardware/OS can display from our 24bit framebuffer. It is not yet as performance optimized as the existing drivers but should be good enough.The vast number of small changes is due to the fact that fb_data can be a struct type now, while most of the code expected a scalar type. lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit it enforces the generic C code. All plugins are ported over. Except for rockpaint. It uses so much memory that it wouldnt fit into the 512k plugin buffer anymore (patches welcome). Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
2014-06-18 05:15:00 +00:00
#define LCD_DEPTH 24
Samsung YP-R1 target port This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
2013-09-10 20:48:34 +00:00
/* Calculated value, important for touch sensor */
#define LCD_DPI 180
/* Check that but should not matter */
lcd-24bit: Introduce a 24-bit mid-level LCD driver With LCD driver all calculation will be performed on RGB888 and the hardware/OS can display from our 24bit framebuffer. It is not yet as performance optimized as the existing drivers but should be good enough.The vast number of small changes is due to the fact that fb_data can be a struct type now, while most of the code expected a scalar type. lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit it enforces the generic C code. All plugins are ported over. Except for rockpaint. It uses so much memory that it wouldnt fit into the 512k plugin buffer anymore (patches welcome). Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
2014-06-18 05:15:00 +00:00
#define LCD_PIXELFORMAT RGB888
Samsung YP-R1 target port This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
2013-09-10 20:48:34 +00:00
/* Capacitive touchscreen */
#define HAVE_TOUCHSCREEN
#define HAVE_BUTTON_DATA
/* We have backlight to control */
#define HAVE_BACKLIGHT
/* Define this for LCD backlight brightness available */
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults */
/* From 0 to 32. Default is 18, that is set by the bootloader
* We stay a little lower since OF makes a distinction between
* two LCD screens (there is no reason to go further than 25 in any case)
*/
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 25
#define DEFAULT_BRIGHTNESS_SETTING 18
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x80000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x100000
#define AB_REPEAT_ENABLE
[3/4] Completely remove HWCODEC support 'swcodec' is now always set (and recording_swcodec for recording-capable units) in feature.txt so the manual and language strings don't need to all be fixed up. Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
2020-07-17 04:01:32 +00:00
Samsung YP-R1 target port This is the basic port to the new target Samsung YP-R1, which runs on a similar platform as YP-R0. Port is usable, although there are still some optimizations that have to be done. Change-Id: If83a8e386369e413581753780c159026d9e41f04
2013-09-10 20:48:34 +00:00
/* R1 KeyPad configuration for plugins */
#define CONFIG_KEYPAD SAMSUNG_YPR1_PAD
#define BUTTON_DRIVER_CLOSE
/* We have WM1808, which so far is compatible with the following */
#define HAVE_WM8978
/* For the moment the only supported frequency is 44kHz,
* even if the codec supports more (see wmcodec-ypr1.c)
*/
#define HW_SAMPR_CAPS SAMPR_CAP_44
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */
/* R1 has a standard linux RTC driver on /dev/rtc1 (->/dev/rtc)
* The RTC is S35392 A
*/
#define CONFIG_RTC APPLICATION
#define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 600 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* R1's fuel gauge max17040 can supply both kind of values */
#define CONFIG_BATTERY_MEASURE PERCENTAGE_MEASURE
/* Hardware controls charging, we can monitor */
#define CONFIG_CHARGING CHARGING_MONITOR
#define CONFIG_LCD LCD_SAMSUNGYPR1
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* This mount point resides in the rootfs, binded to /mnt/media0/.rockbox */
#define BOOTDIR "/.rockbox"
storage: Add STORAGE_HOSTFS CONFIG_STORAGE & STORAGE_HOSTFS allows to use parts of the storage_* API to be compiled for application targets without compiling storage.c or performing actually raw storage access. This is primarily to enable application targets to implement HAVE_MULTIVOMULE/HAVE_HOTSWAP (in a later commit). SIMULATOR uses the same mechanism without explicitely defining STORAGE_HOSTFS (how to add a bit to an existing preprocessor token?). Change-Id: Ib3f8ee0d5231e2ed21ff00842d51e32bc4fc7292
2014-02-07 17:12:31 +00:00
/* No special storage */
#define CONFIG_STORAGE STORAGE_HOSTFS
#define HAVE_STORAGE_FLUSH
yp-r1: Fix some of the simulator build issues. Change-Id: I167b801acaff9d36f3fd2fa57ba295d05816c60d
2020-07-07 18:33:17 +00:00
/** Non-simulator section **/
#ifndef SIMULATOR
#define USB_NONE
/* We have the Si4709 */
#define CONFIG_TUNER SI4700
#define HAVE_TUNER_PWR_CTRL
#define HAVE_RDS_CAP
/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN
#define INPUT_SRC_CAPS SRC_CAP_FMRADIO
/* We have a GPIO pin that detects it */
#define HAVE_HEADPHONE_DETECTION
/* Define current usage levels. */
#define CURRENT_NORMAL 24 /* ~25h, on 600mAh that's about 24mA */
#define CURRENT_BACKLIGHT 62 /* ~6,5h -> 92mA. Minus 24mA normal that gives us 68mA */
#endif /* SIMULATOR */
Reference in a new issue Copy permalink