rockbox/firmware/export/config/gogearhdd6330.h

/*
 * This config file is for the Philips GoGear HDD63x0
 */

/* For Rolo and boot loader */
#define MODEL_NUMBER 65
#define MODEL_NAME   "Philips GoGear HDD63x0"

/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA

/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48

/* define this if you have recording possibility */
#define HAVE_RECORDING

/* Define bitmask of input sources - recordable bitmask can be defined
   explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)

/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)

/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)




/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR

/* define this if you want album art for this target */
#define HAVE_ALBUMART

/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING

/* define this to enable JPEG decoding */
#define HAVE_JPEG

/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN

/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE

/* LCD dimensions */
#define LCD_WIDTH  220
#define LCD_HEIGHT 176
/* sqrt(220^2 + 176^2) / 2.0 = 140.9 */
#define LCD_DPI 141
#define LCD_DEPTH  16   /* 65536 colours */
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */

#ifndef BOOTLOADER
/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE

/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
 * should be defined as well.
 * We can currently put the lcd to sleep but it won't wake up properly */
/* #define HAVE_LCD_SLEEP */
/* #define HAVE_LCD_SLEEP_SETTING */
#endif

/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP

/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT

/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */

#define CONFIG_KEYPAD PHILIPS_HDD6330_PAD

#define HAVE_HARDWARE_CLICK

/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT

/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST




/* define this if you have a real-time clock. The HDD16x0 has a PCF8563 RTC,
   but it's register compatible with the E8564. */
#ifndef BOOTLOADER
#define CONFIG_RTC RTC_E8564
#define HAVE_RTC_ALARM
#endif

/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF

/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000

/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000

/* Define this if you have the WM8731 audio codec */
#define HAVE_WM8731

/* WM8731 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS

#define AB_REPEAT_ENABLE

/* FM Tuner */
#define CONFIG_TUNER      TEA5767
#define CONFIG_TUNER_XTAL 32768

/* define this if you have a disk storage, i.e. something
   that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE

/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS

/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING

/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING      1
#define MAX_BRIGHTNESS_SETTING     16
#define DEFAULT_BRIGHTNESS_SETTING 13 /* match OF brightness */

/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
#define HAVE_BUTTONLIGHT_BRIGHTNESS

/* Define this if you can detect headphones */
#define HAVE_HEADPHONE_DETECTION

#define BATTERY_CAPACITY_DEFAULT 840 /* default battery capacity */
#define BATTERY_CAPACITY_MIN     800 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX    1200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC      20 /* capacity increment */
#define BATTERY_TYPES_COUNT        1 /* only one type */

#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE

/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE

/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER

/* Define this if you have a PortalPlayer PP5020 */
#define CONFIG_CPU PP5022

/* Define this if you want to use the PP5020 i2c interface */
#define CONFIG_I2C I2C_PP5020

/* define this if the hardware can be powered off while charging */
/* It doesn't make sense because original bootloader starts the DAP
   right after */
/* #define HAVE_POWEROFF_WHILE_CHARGING */

/* The start address index for ROM builds */
#define ROM_START 0x00000000

/* The size of the flash ROM */
#define FLASH_SIZE 0x100000

/* Define this to the CPU frequency */
#define CPU_FREQ      75000000

/* Type of LCD */
#define CONFIG_LCD LCD_HDD6330

/* Define this if your LCD can set contrast */
/* #define HAVE_LCD_CONTRAST */

#define MIN_CONTRAST_SETTING        0
#define MAX_CONTRAST_SETTING        127
#define DEFAULT_CONTRAST_SETTING    63 /* Match boot contrast */

/* We're able to shut off power to the HDD */
#define HAVE_ATA_POWER_OFF

/* Offset ( in the firmware file's header ) to the file CRC and data. These are
   only used when loading the old format rockbox.e200 file */
#define FIRMWARE_OFFSET_FILE_CRC    0x0
#define FIRMWARE_OFFSET_FILE_DATA   0x8

/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC

/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0471
#define USB_PRODUCT_ID 0x014B
#define HAVE_USB_HID_MOUSE

/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ

#define MI4_FORMAT
#define BOOTFILE_EXT    "mi4"
#define BOOTFILE        "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"

#define ICODE_ATTR_TREMOR_NOT_MDCT

/* DMA is used only for reading on PP502x because although reads are ~8x faster
 * writes appear to be ~25% slower.
 */
/* TODO: it does not work - it hangs the player */
/* #define HAVE_ATA_DMA */

/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY