rockbox/bootloader/gigabeat-s.c

377 lines
9 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Greg White
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include <sprintf.h>
#include "kernel.h"
#include "string.h"
#include "adc.h"
#include "powermgmt.h"
#include "ata.h"
#include "dir.h"
#include "disk.h"
#include "common.h"
#include "backlight.h"
#include "usb.h"
#include "button.h"
#include "font.h"
#include "lcd.h"
#include "usb-target.h"
#define TAR_CHUNK 512
#define TAR_HEADER_SIZE 157
const char version[] = APPSVERSION;
/* Where files sent via MTP are stored */
static const char basedir[] = "/Content/0b00/00/";
/* Can use memory after vector table up to 0x01f00000 */
static char * const tarbuf = (char *)0x00000040;
static const size_t tarbuf_size = 0x01f00000 - 0x00000040;
/* Firmware data */
static void * const load_buf = 0x00000000;
static const size_t load_buf_size = 0x20000000 - 0x100000;
static const void * const start_addr = 0x00000000;
static void show_splash(int timeout, const char *msg)
{
backlight_on();
reset_screen();
lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * strlen(msg))) / 2,
(LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg);
lcd_update();
sleep(timeout);
}
static bool pause_if_button_pressed(bool pre_usb)
{
while (1)
{
int button = button_read_device();
if (pre_usb && !usb_plugged())
return false;
/* Exit if no button or only the menu (settings reset) button */
switch (button)
{
case BUTTON_MENU:
case BUTTON_NONE:
return true;
}
sleep(HZ/5);
/* If the disk powers off, the firmware will lock at startup */
ata_spin();
}
}
/* TODO: Handle charging while connected */
static void handle_usb(void)
{
int button;
/* Check if plugged and pause to look at messages. If the cable was pulled
* while waiting, proceed as if it never was plugged. */
if (!usb_plugged() || !pause_if_button_pressed(true))
{
/* Bang on the controller */
usb_init_device();
return;
}
/** Enter USB mode **/
/* We need full button and backlight handling now */
backlight_init();
button_init();
/* Start the USB driver */
usb_init();
usb_start_monitoring();
/* Wait for threads to connect or cable is pulled */
show_splash(HZ/2, "Waiting for USB");
while (1)
{
button = button_get_w_tmo(HZ/2);
if (button == SYS_USB_CONNECTED)
break; /* Hit */
if (!usb_plugged())
break; /* Cable pulled */
}
if (button == SYS_USB_CONNECTED)
{
/* Got the message - wait for disconnect */
show_splash(0, "Bootloader USB mode");
usb_acknowledge(SYS_USB_CONNECTED_ACK);
while (1)
{
button = button_get(true);
if (button == SYS_USB_DISCONNECTED)
{
usb_acknowledge(SYS_USB_DISCONNECTED_ACK);
break;
}
}
}
/* Put drivers initialized for USB connection into a known state */
backlight_on();
usb_close();
button_close();
backlight_close();
reset_screen();
}
static void untar(int tar_fd)
{
char header[TAR_HEADER_SIZE];
char *ptr;
char path[102];
int fd, i;
int ret;
size_t size = filesize(tar_fd);
if (size > tarbuf_size)
{
printf("tar file too large"); /* Paranoid but proper */
return;
}
ret = read(tar_fd, tarbuf, filesize(tar_fd));
if (ret < 0)
{
printf("couldn't read tar file (%d)", ret);
return;
}
ptr = tarbuf;
while (1)
{
memcpy(header, ptr, TAR_HEADER_SIZE);
if (*header == '\0') /* Check for EOF */
break;
/* Parse the size field */
size = 0;
for (i = 124 ; i < 124 + 11 ; i++) {
size = (8 * size) + header[i] - '0';
}
/* Skip rest of header */
ptr += TAR_CHUNK;
/* Make the path absolute */
strcpy(path, "/");
strcat(path, header);
if (header[156] == '0') /* file */
{
int wc;
fd = creat(path);
if (fd < 0)
{
printf("failed to create file (%d)", fd);
}
else
{
wc = write(fd, ptr, size);
if (wc < 0)
{
printf("write failed (%d)", wc);
break;
}
close(fd);
}
ptr += (size + TAR_CHUNK-1) & (~(TAR_CHUNK-1));
}
else if (header[156] == '5') /* directory */
{
int ret;
/* Remove the trailing slash */
if (path[strlen(path) - 1] == '/')
path[strlen(path) - 1] = '\0';
/* Create the dir */
ret = mkdir(path);
if (ret < 0 && ret != -4)
{
printf("failed to create dir (%d)", ret);
}
}
}
}
/* Look for a tar file or rockbox binary in the MTP directory */
static void handle_untar(void)
{
char buf[MAX_PATH];
char tarstring[6];
char model[5];
struct dirent_uncached* entry;
DIR_UNCACHED* dir;
int fd;
int rc;
dir = opendir_uncached(basedir);
while ((entry = readdir_uncached(dir)))
{
if (*entry->d_name == '.')
continue;
snprintf(buf, sizeof(buf), "%s%s", basedir, entry->d_name);
fd = open(buf, O_RDONLY);
if (fd < 0)
continue;
/* Check whether the file is a rockbox binary. */
lseek(fd, 4, SEEK_SET);
rc = read(fd, model, 4);
if (rc == 4)
{
model[4] = 0;
if (strcmp(model, "gigs") == 0)
{
printf("Found rockbox binary. Moving...");
close(fd);
remove("/.rockbox/rockbox.gigabeat");
int ret = rename(buf, "/.rockbox/rockbox.gigabeat");
printf("returned %d", ret);
sleep(HZ);
break;
}
}
/* Check whether the file is a tar file. */
lseek(fd, 257, SEEK_SET);
rc = read(fd, tarstring, 5);
if (rc == 5)
{
tarstring[5] = 0;
if (strcmp(tarstring, "ustar") == 0)
{
printf("Found tar file. Unarchiving...");
lseek(fd, 0, SEEK_SET);
untar(fd);
close(fd);
printf("Removing tar file");
remove(buf);
break;
}
}
close(fd);
}
}
/* Try to load the firmware and run it */
static void __attribute__((noreturn)) handle_firmware_load(void)
{
int rc = load_firmware(load_buf, "/.rockbox/rockbox.gigabeat",
load_buf_size);
if(rc < 0)
error(EBOOTFILE, rc);
/* Pause to look at messages */
pause_if_button_pressed(false);
/* Put drivers into a known state */
button_close_device();
ata_close();
system_prepare_fw_start();
if (rc == EOK)
{
invalidate_icache();
asm volatile ("bx %0": : "r"(start_addr));
}
/* Halt */
while (1)
core_idle();
}
static void check_battery(void)
{
int batt = battery_adc_voltage();
printf("Battery: %d.%03d V", batt / 1000, batt % 1000);
/* TODO: warn on low battery or shut down */
}
void main(void)
{
int rc;
/* Flush and invalidate all caches (because vectors were written) */
invalidate_icache();
lcd_clear_display();
printf("Gigabeat S Rockbox Bootloader");
printf("Version %s", version);
system_init();
kernel_init();
enable_interrupt(IRQ_FIQ_STATUS);
/* Initialize KPP so we can poll the button states */
button_init_device();
adc_init();
check_battery();
rc = ata_init();
if(rc)
{
reset_screen();
error(EATA, rc);
}
disk_init();
rc = disk_mount_all();
if (rc<=0)
{
error(EDISK,rc);
}
printf("Init complete");
/* Do USB first since a tar or binary could be added to the MTP directory
* at the time and we can untar or move after unplugging. */
handle_usb();
handle_untar();
handle_firmware_load(); /* No return */
}