Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/bootloader/SOURCES

95 lines
2.2 KiB
Text
Raw Normal View History

FS#6554. Move bootloader code into a common file. Only PortalPlayer devices (iPods, H10, Sansa) are affected for the moment. Someone with access to (and no fear of bricking) an X5, H100, H300 and Gigabeat should try to adapt those bootloaders to also use the code in common.c. The (non-working) patch in the tracker would be a good place to start with this. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12136 a1c6a512-1295-4272-9138-f99709370657
2007-01-28 18:42:11 +00:00
common.c
ClipPlus BOOTLOADER DONT FIT! REMOVED FROM ALL NATIVE BOOTLOADERS: finish removing the text scrolling pare down printf to a minimal subset (%c %s %l %d %u and %x(%p)) remove diacritic and rtl language support GOAL 134000 START 135305 CURRENT 133700 SUCCESS! (ASSUMING IT WORKS -- UNESTED) Change-Id: Ic3f6ac1dc260578f581ee53458b3e5bb47d313ec
2020-10-23 04:40:52 +00:00
format.c
snprintf.c
FS#6554 - Move bootloader code into a common file git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12453 a1c6a512-1295-4272-9138-f99709370657
2007-02-22 15:09:49 +00:00
Make the Nano2G bootloader actually function as a bootloader. The resulting bootloader-ipodnano2g.ipod file needs to be encrypted on a target using the crypt_firmware plugin to create bootloader-ipodnano2g.ipodx, which can then be written to the firmware partition using the ipodpatcher patch at FS#10609. Dual-booting doesn't work yet - only Rockbox can be run. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23084 a1c6a512-1295-4272-9138-f99709370657
2009-10-11 01:37:12 +00:00
#if defined(IPOD_NANO2G)
ipodnano2g.c
ipod6g: bootloader v1 - dual boot - USB mode - battery trap Change-Id: I8586cfeb21ee63f45ab965430725225fdfc4212d
2016-02-05 01:02:02 +00:00
#elif defined(IPOD_6G)
ipod6g.c
Make the Nano2G bootloader actually function as a bootloader. The resulting bootloader-ipodnano2g.ipod file needs to be encrypted on a target using the crypt_firmware plugin to create bootloader-ipodnano2g.ipodx, which can then be written to the firmware partition using the ipodpatcher patch at FS#10609. Dual-booting doesn't work yet - only Rockbox can be run. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23084 a1c6a512-1295-4272-9138-f99709370657
2009-10-11 01:37:12 +00:00
#elif defined(IPOD_ARCH)
Initial check-in of work-in-progress iPod bootloader. Current targets are iPod Color/Photo and iPod Nano. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7784 a1c6a512-1295-4272-9138-f99709370657
2005-11-08 00:52:39 +00:00
ipod.c
initial gigabeat bootloader (only test code) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10536 a1c6a512-1295-4272-9138-f99709370657
2006-08-12 08:27:48 +00:00
#elif defined(GIGABEAT_F)
gigabeat.c
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
#elif defined(GIGABEAT_S)
gigabeat-s.c
Gigabeat S: Renovate bootloader a bit to show splash, implement verbose, shutdown on low battery, handle hold-switch-on and wait only so long for USB if a USB charger is inserted at boot instead of being connected to a host. 'Bootloader USB mode' display is just part of normal printf stream now. Move interrupt stacks into .bss area so they aren't loaded (for firmware too). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29099 a1c6a512-1295-4272-9138-f99709370657
2011-01-21 07:05:51 +00:00
show_logo.c
Gigabeat S: Fix bootloader red from r25547 commit. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25548 a1c6a512-1295-4272-9138-f99709370657
2010-04-09 01:28:19 +00:00
../firmware/target/arm/imx31/mmu-imx31.c
Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:28:58 +00:00
#elif defined(IRIVER_H10) || defined(IRIVER_H10_5GB) || \
Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 07:24:43 +00:00
defined(SANSA_E200) || defined(SANSA_C200) || \
My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 18:40:25 +00:00
defined(MROBE_100) || defined(PHILIPS_SA9200) || \
Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24112 a1c6a512-1295-4272-9138-f99709370657
2009-12-25 04:05:01 +00:00
defined(PHILIPS_HDD1630) || defined(PHILIPS_HDD6330) || \
defined(SAMSUNG_YH820) || defined(SAMSUNG_YH920) || \
defined(SAMSUNG_YH925) || defined(SANSA_VIEW)
Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written. Requires a custom version of e200tool which isnt available yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14654 a1c6a512-1295-4272-9138-f99709370657
2007-09-09 11:20:20 +00:00
#ifdef E200R_INSTALLER
main-e200r-installer.c
Rework c200wipe to use proper partitioning and formatting code, which makes the code size-independent. Also support the e200 with this code. Apparently it's also possible to get the e200 in a state where .fmt files don't help. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30413 a1c6a512-1295-4272-9138-f99709370657
2011-09-02 21:34:28 +00:00
#elif defined(SANSA_PP_ERASE)
main-ppsansawipe.c
fat32format.c
Sansa View: replace real bootloader with a simple test code. After placing the firmware.mi4 file in the root dir of the player in UMS mode of the OF, Sansa should do stupid blinking with the backlight and buttonlight alternately. Recovering from this state is possible through the recovery mode (see Wiki), by putting an original copy of the firmware.mi4. Change-Id: Ia913442b97e8c405f55c4676b9a2bf0b1b1d05d6
2014-03-27 23:31:04 +00:00
#elif defined(SANSA_VIEW)
sansaview.c
Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written. Requires a custom version of e200tool which isnt available yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14654 a1c6a512-1295-4272-9138-f99709370657
2007-09-09 11:20:20 +00:00
#else
FS#7977: Bootloader logo for PP-based targets (H10, Sansa, M-Robe 100). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17374 a1c6a512-1295-4272-9138-f99709370657
2008-05-05 12:05:00 +00:00
show_logo.c
Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works. Changes made: Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader. Define MODEL_NAME string in config-*.h for use in bootloader. Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S. Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe): * Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100). * Remove unused DEBUG and STUB code from crt0-pp.S. * Make CPU wait for COP to be sleeping when we put the COP to sleep. * Invalidate COP cache when COP wakes * Flush CPU cache before waking COP * Make sure only the CPU clears the BSS (not the COP) * Make sure only the CPU sets up its own stack (not the COP) Rolo works on H10, so enable it. Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
2006-12-19 11:33:53 +00:00
main-pp.c
Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written. Requires a custom version of e200tool which isnt available yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14654 a1c6a512-1295-4272-9138-f99709370657
2007-09-09 11:20:20 +00:00
#endif
make tpj1022 bootloader compile again git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23892 a1c6a512-1295-4272-9138-f99709370657
2009-12-07 16:12:49 +00:00
#elif defined(TATUNG_TPJ1022)
Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10828 a1c6a512-1295-4272-9138-f99709370657
2006-08-31 19:19:35 +00:00
tpj1022.c
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
#elif defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(IAUDIO_M3)
Really fix low-bat detection in the iAudio bootloader. * Improve naming of iriver and iaudio bootloader files. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16649 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 23:19:44 +00:00
iaudio_coldfire.c
#elif defined(IRIVER_H100_SERIES)
iriver_h1x0.c
H300 bootloader: (Work in progress) Boot Rockbox on RTC alarm, add charging screen, move to a separate source file, backlight is on during USB mode (again) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12546 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 11:28:23 +00:00
#elif defined(IRIVER_H300_SERIES)
iriver_h300.c
Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14763 a1c6a512-1295-4272-9138-f99709370657
2007-09-20 04:46:41 +00:00
#elif defined(MROBE_500)
mrobe500.c
Nuke all TCC77x targets: iAudio 7, Sansa C100, M200(v1-3), Logik DAX They were never finished, never saw any release ever, and haven't compiled for the better part of a decade. Given their HW capabilities [1], they are not worth trying to fix. [1] 1-2MB RAM, ~256MB onboard flash, no expandability Change-Id: I7b2a5806d687114c22156bb0458d4a10a9734190
2021-04-23 15:09:49 +00:00
#elif defined(CPU_TCC780X)
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
telechips.c
Show the Rockbox logo in the Telechips bootloader. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19129 a1c6a512-1295-4272-9138-f99709370657
2008-11-17 21:16:00 +00:00
show_logo.c
initial Meizu M6SL port (take 2) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 23:24:34 +00:00
#elif defined(MEIZU_M6SL)
meizu_m6sl.c
add Meizu M6SP and M3 ports git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
2008-09-17 23:22:11 +00:00
#elif defined(MEIZU_M6SP)
meizu_m6sp.c
#elif defined(MEIZU_M3)
meizu_m3.c
Start of a Rockbox port to the Samsung YP-S3. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22085 a1c6a512-1295-4272-9138-f99709370657
2009-07-29 20:42:02 +00:00
#elif defined(SAMSUNG_YPS3)
samsung_yps3.c
* Commit a modified FS#10354 (thanks to Davide Quarta) - add support the VX747+ in scramble and configure * Add support for the VX777 * Remove the touchscreen mode switching combo from the button driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21379 a1c6a512-1295-4272-9138-f99709370657
2009-06-20 10:54:13 +00:00
#elif defined(ONDA_VX747) || defined(ONDA_VX747P) || defined(ONDA_VX767) || defined(ONDA_VX777)
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
ondavx747.c
Onda VX747: add dual-boot capability + make it possible to permanently 'stick' Rockbox to your DAP git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21919 a1c6a512-1295-4272-9138-f99709370657
2009-07-17 14:30:42 +00:00
show_logo.c
Add cleaned-up xDuoo X3 support Cleaned up, rebased, and forward-ported from the xvortex fork. (original credit to vsoftster@gmail.com) Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
2018-06-28 10:24:26 +00:00
#elif defined(XDUOO_X3)
xduoox3.c
show_logo.c
Share bootloader with Creative ZVM 30GB/60GB and Creative ZV git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18415 a1c6a512-1295-4272-9138-f99709370657
2008-09-04 19:53:16 +00:00
#elif defined(CREATIVE_ZVx)
* Commit dual-boot support for Creative ZVx family * Add mkzenboot: makes it possible to integrate Rockbox bootloader with Creative firmwares without the need of distributing binaries * Add Tadeusz Pyś to credits, who figured out the minifs file system * Fix bootloader git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18352 a1c6a512-1295-4272-9138-f99709370657
2008-08-27 20:32:12 +00:00
creativezvm.c
FS#10047 : Clipv2 Reuse some code from Clip (LCD) and a lot of code from AS3525 Add a new CPU type : AS3525v2, identical to AS3525 except it's an ARMv5 (arm926-ejs) SD code still not working For an unknown reason LCD doesn't work anymore (to be investigated) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24131 a1c6a512-1295-4272-9138-f99709370657
2009-12-31 19:15:20 +00:00
#elif CONFIG_CPU==AS3525 || CONFIG_CPU==AS3525v2
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 16:46:01 +00:00
sansa_as3525.c
show_logo.c
Sansa Fuze+: initial commit (bootloader only, LCD basically working) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29808 a1c6a512-1295-4272-9138-f99709370657
2011-05-01 13:02:46 +00:00
#elif CONFIG_CPU==IMX233
imx233.c
Initial commit for the "Lyre prototype 1" port by Jorge Pinto from FS#10045. Bootloader builds, normal does not. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20574 a1c6a512-1295-4272-9138-f99709370657
2009-03-30 12:20:47 +00:00
#elif defined(LYRE_PROTO1)
lyre_proto1.c
show_logo.c
Initial mini2440 port. Flyspray: FS#10627 Author: Bob Cousins git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23265 a1c6a512-1295-4272-9138-f99709370657
2009-10-19 18:14:27 +00:00
#elif defined(MINI2440)
mini2440.c
show_logo.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok Author: Szymon Dziok Flyspray: FS#10912 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24276 a1c6a512-1295-4272-9138-f99709370657
2010-01-18 19:05:20 +00:00
#elif defined(PBELL_VIBE500)
Packard Bell Vibe 500: remove the old bootloader code (actually a lack of code) and make the main-pp.c acting like a true bootloader for the DAP. It's the first step to integrate the DAP with the RBUtil. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25311 a1c6a512-1295-4272-9138-f99709370657
2010-03-23 21:28:25 +00:00
main-pp.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok Author: Szymon Dziok Flyspray: FS#10912 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24276 a1c6a512-1295-4272-9138-f99709370657
2010-01-18 19:05:20 +00:00
show_logo.c
MPIO HD300 - initial commit git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28680 a1c6a512-1295-4272-9138-f99709370657
2010-11-26 23:28:08 +00:00
#elif defined(MPIO_HD200) || defined(MPIO_HD300)
Rename bootloader file for MPIO players as it supports both HD200 and HD300. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28700 a1c6a512-1295-4272-9138-f99709370657
2010-11-28 23:10:09 +00:00
mpio_hd200_hd300.c
Initial commit for the Sony NWZ linux port SUPPORTED SERIES: - NWZ-E450 - NWZ-E460 - NWZ-E470 - NWZ-E580 - NWZ-A10 NOTES: - bootloader makefile convert an extra font to be installed alongside the bootloader since sysfont is way too small - the toolsicon bitmap comes from the Oxygen iconset - touchscreen driver is untested TODO: - implement audio routing driver (pcm is handled by pcm-alsa) - fix playback: it crashes on illegal instruction in DEBUG builds - find out why the browser starts at / instead of /contents - implement radio support - implement return to OF for usb handling - calibrate battery curve (NB: of can report a battery level on a 0-5 scale but probabl don't want to use that ?) - implement simulator build (we need a nice image of the player) - figure out if we can detect jack removal POTENTIAL TODOS: - try to build a usb serial gadget and gdbserver Change-Id: Ic77d71e0651355d47cc4e423a40fb64a60c69a80
2017-02-23 10:33:19 +00:00
#elif defined(SONY_NWZ_LINUX)
nwz_linux.c
Rename symbols of FiiO M3K Linux-based port Mainly a straight replacement of FIIO_M3K -> FIIO_M3K_LINUX. Change-Id: Id07c84f8150991d1b6851540c2c3f8f67e3f12c2
2021-02-27 22:07:37 +00:00
#elif defined(HIBY_LINUX) || defined(FIIO_M3K_LINUX)
Agptek Rocker: Initial commit Change-Id: I26b51106c7b1c36a603fba6d521e917d79b5a95b
2017-04-27 09:36:40 +00:00
rocker_linux.c
Introduce HiFi E.T. MA9C port. The only difference between this target and HiFi E.T. MA9 is display driver (ILI9342 in MA9 and ILI9342c in MA9C) Change-Id: Icc3d2490f850902a653175360f12283f3708bbb7
2013-10-27 18:34:24 +00:00
#elif defined(RK27_GENERIC) || defined(HM60X) || defined(HM801) \
Introduce IHIFI760/960 targets. Change-Id: Ie36e48742c0ed9aa3fd6f49aa034a11d2492327c
2013-11-16 14:21:00 +00:00
|| defined(MA9) || defined(MA9C) || defined(MA8) || defined(MA8C) \
Add Xuelin iHIFI 770/770C/800 support Taken from the xvortex fork (Roman Stolyarov) Ported, rebased, and cleaned up by myself. Change-Id: I7b2bca2d29502f2e4544e42f3d122786dd4b7978
2018-06-29 20:09:28 +00:00
|| defined(IHIFI760) || defined(IHIFI960) || defined(IHIFI800) \
|| defined(IHIFI770) || defined(IHIFI770C)
Rockchip rk27xx port initial commit. This is still work in progress. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29935 a1c6a512-1295-4272-9138-f99709370657
2011-05-30 21:10:37 +00:00
rk27xx.c
show_logo.c
Sandisk Sansa Connect port (FS #12363) Included are drivers for buttons, backlight, lcd, audio and storage. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657
2011-11-16 14:08:01 +00:00
#elif defined(SANSA_CONNECT)
sansaconnect.c
show_logo.c
FiiO M3K: New bootloader SPL and UCL-compressed bootloader are now packed into one output, bootloader.m3k, eliminating the separate SPL build phase. The Rockbox bootloader now has a recovery menu, accessible by holding VOL+ when booting, that lets you back up, restore, and update the bootloader from the device. Change-Id: I642c6e5fb83587a013ab2fbfd1adab439561ced2
2021-05-11 12:28:43 +00:00
#elif defined(FIIO_M3K)
New port: FiiO M3K on bare metal Change-Id: I7517e7d5459e129dcfc9465c6fbd708619888fbe
2021-02-27 22:08:58 +00:00
fiiom3k.c
#endif
Reference in a new issue Copy permalink