rockbox/firmware/export/config/lyreproto1.h

104 lines
3.2 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
*
*
* Copyright (C) 2009 by Jorge Pinto
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/*
* This config file is for the Lyre prototype 1.
*/
#define TARGET_TREE /* this target is using the target tree system */
#define CONFIG_SDRAM_START 0x20000000
/* For Rolo and boot loader */
#define MODEL_NUMBER 130
/* define this if the flash memory uses the
* SecureDigital Memory Card protocol */
#define CONFIG_STORAGE STORAGE_SD
#define HAVE_FLASH_STORAGE
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
#define CONFIG_LCD LCD_LYRE_PROTO1
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 128
/* The LCD used is just rgb444, 64 colours. We do a bit conversion on LCD
* drivers. */
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
#define CONFIG_KEYPAD LYRE_PROTO1_PAD
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x100000
/* Lyre prototype 1 do not use I2C, just SPI */
#define CONFIG_I2C I2C_NONE
/* Define this if you have the TLV320 audio codec -> controlled by the DSP */
#define HAVE_TLV320
/* TLV320 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
#define BATTERY_CAPACITY_DEFAULT 1100 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 2500 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 100 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_CPU AT91SAM9260
/* Define this to the CPU frequency */
#define CPU_FREQ 198656000
#define MCK_FREQ 99328000
#define SLOW_CLOCK 32768
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#define BOOTFILE_EXT "lyre_proto1"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"