rockbox/firmware/target/arm/as3525/sansa-clipplus/lcd-clip-plus.c

71 lines
2 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 François Dinel
* Copyright (C) 2008-2009 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "lcd.h"
#include "lcd-clip.h"
#include "system.h"
#include "cpu.h"
void lcd_hw_init(int *offset)
{
bitset32(&CGU_PERI, CGU_SSP_CLOCK_ENABLE);
SSP_CPSR = AS3525_SSP_PRESCALER; /* OF = 0x10 */
SSP_CR0 = (1<<7) | (1<<6) | 7; /* Motorola SPI frame format, 8 bits */
SSP_CR1 = (1<<3) | (1<<1); /* SSP Operation enabled */
SSP_IMSC = 0; /* No interrupts */
GPIOA_DIR |= (1<<5);
GPIOB_DIR |= (1<<2) | (1<<7);
GPIOB_DIR &= ~(1<<3);
GPIOB_PIN(7) = 0;
GPIOA_PIN(5) = (1<<5);
*offset = GPIOB_PIN(3) ? 0 : 2;
}
void lcd_write_command(int byte)
{
while(SSP_SR & (1<<4)) /* BSY flag */
;
GPIOB_PIN(2) = 0;
SSP_DATA = byte;
while(SSP_SR & (1<<4)) /* BSY flag */
;
}
void lcd_write_data(const fb_data* p_bytes, int count)
{
GPIOB_PIN(2) = (1<<2);
while (count--)
{
while(!(SSP_SR & (1<<1))) /* wait until transmit FIFO is not full */
;
SSP_DATA = *p_bytes++;
}
}