rockbox/firmware/export/config-m200v4.h

150 lines
4 KiB
C
Raw Normal View History

/*
* This config file is for the Sansa M200 V4 series
*/
#define TARGET_TREE /* this target is using the target tree system */
/* For Rolo and boot loader */
#define MODEL_NUMBER 42
#define MODEL_NAME "Sandisk Sansa m200 v4 series"
/* Enable FAT16 support */
#define HAVE_FAT16SUPPORT
#if 0 /* disabled since there is no driver (yet) */
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define REC_SAMPR_CAPS (SAMPR_CAP_22)
#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
#define REC_SAMPR_DEFAULT SAMPR_22
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
#endif
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* define this if you have access to the quickscreen */
//#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
//#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
//#define HAVE_TAGCACHE
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define CONFIG_STORAGE STORAGE_SD
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 64
#define LCD_DEPTH 1
#define LCD_PIXELFORMAT VERTICAL_PACKING
/* define this to indicate your device's keypad */
#define CONFIG_KEYPAD SANSA_M200_PAD
/* define this if you have a real-time clock */
#ifndef BOOTLOADER
#define CONFIG_RTC RTC_AS3514
#endif
/* define this if you have RTC RAM available for settings */
//#define HAVE_RTC_RAM
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x48000 /* in IRAM */
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x60000
#define AB_REPEAT_ENABLE 1
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* Define this if you have the TLV320 audio codec */
/*#define HAVE_TLV320*/
/* TLV320 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* We're working on the assumption that the AS3525 has something
similar to the AS3514 for audio codec etc */
#define HAVE_AS3514
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define CONFIG_I2C I2C_AS3525
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* define this if the unit should not shut down on low battery. */
#define NO_LOW_BATTERY_SHUTDOWN
#ifndef SIMULATOR
/* Define this if you have an AMS AS3525 */
#define CONFIG_CPU AS3525
/* Define this if you want to use the AS3525 i2c interface */
#define CONFIG_I2C I2C_AS3525
/* Define this to the CPU frequency */
#define CPU_FREQ 250000000
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* Software controlled LED */
#define CONFIG_LED LED_VIRTUAL
#define CONFIG_LCD LCD_SSD1815
#define BOOTFILE_EXT "sansa"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define IBSS_ATTR_VOICE_STACK
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define ICODE_ATTR_TREMOR_MDCT
#define ICODE_ATTR_FLAC
#define IBSS_ATTR_FLAC_DECODED0
#define ICONST_ATTR_MPA_HUFFMAN
#define IBSS_ATTR_MPC_SAMPLE_BUF
#define ICODE_ATTR_ALAC
#define IBSS_ATTR_SHORTEN_DECODED0
#endif /* SIMULATOR */